Active fire protection

This MedLibrary.org supplementary page on Active fire protection is provided directly from the open source Wikipedia as a service to our readers. Please see the note below on authorship of this content, as well as the Wikipedia usage guidelines. To search for other content from our encyclopedia supplement, please use the form below:

Active fire protection (AFP) is an integral part of fire protection. AFP is characterised by items and/or systems, which require a certain amount of motion and response in order to work, contrary to passive fire protection.

Contents

Categories of Active Fire Protection

1. Fire suppression

Fire can be controlled or extinguished, either manually or automatically. Manual includes the use of a fire extinguisher or a Standpipe system. Automatic means can include a fire sprinkler system, a gaseous clean agent, or fire fighting foam system. Automatic suppression systems would usually be found in large commercial kitchens or other high-risk areas.

1.1 Sprinkler systems

Fire sprinkler systems are installed in high rise buildings, department stores, warehouses and other similar buildings. They are usually located at ceiling level and are supplied by a central system of water pumps and a reservoir. The sprinkler system operates usually when heat at the site of a fire causes a glass component in the sprinkler head to fail, thereby releasing the water from the sprinkler head. This means that only the sprinkler head at the fire location operate - not all the sprinklers on a floor or in a building. (This is a common misconception which stems from action movie scenes). Sprinkler systems help to reduce the growth of a fire. Sprinkler systems are evolving into water mist systems which give finer water droplets.

2. Fire detection

The fire is detected either by locating the smoke, flame or heat, and an alarm is sounded to enable emergency evacuation as well as to dispatch the local fire department. An introduction to fire detection and suppression can be found here. Where a detection system is activated, it can be programmed to carry out other actions. These include de-energising magnetic hold open devices on Fire doors and opening servo-actuated vents in stairways.

Construction and maintenance

All AFP systems are required to be installed and maintained in accordance with strict guidelines in order to maintain compliance with the local building code and the fire code. An example treatise on code compliance in Miami Dade County can be seen here. Code authorities can encourage compliance through open communications, such as an invitation for code questions or an invitation to participate or an explanation of the code development process

AFP works alongside modern architectural designs and construction materials and fire safety education to prevent, retard, and suppress structural fires.

See also

External links

 v  d  e 
Fire protection
General: Active fire protectionFire alarm system

Fire suppression: Fire extinguisherFire sand bucketFire sprinklerGaseous fire suppressionFire blanket
Detection/alarm: Control panelHeat detectorPull stationFire alarm boxNotification applianceSmoke detector
Practices: Fire drill


Wikipedia content modification information:

  • This page was last modified on 7 January 2009, at 18:10.

Wikipedia Authorship and Review

Wikipedia content provided here is not reviewed directly by MedLibrary.org. Wikipedia content is authored by an open community of volunteers and is not produced by or in any way affiliated with MedLibrary.org.

Wikipedia Usage Guidelines

This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "Active fire protection".

The URL for this specific entry is:

All Wikipedia text is available under the terms of the GNU Free Documentation License. (See Copyrights for details). Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.