This MedLibrary.org supplementary page on Engineer's blue is provided directly from the open source Wikipedia as a service to our readers. Please see the note below on authorship of this content, as well as the Wikipedia usage guidelines. To search for other content from our encyclopedia supplement, please use the form below:
Related Sponsors
Engineer's blue is a highly pigmented paste used to assist in the mating of two or more components.
Joseph Whitworth popularized the first practical method of making accurate flat surfaces, during the 1830s, by using engineer's blue and scraping techniques on three trial surfaces. Prior to his scraping technique, the same three plate method was employed using polishing techniques, giving less accurate results. This improvement led to an explosion of development of precision instruments using these flat surface generation techniques as a basis for further construction of precise shapes.
Engineer's blue is prepared by mixing Prussian blue with a non drying oily material (for example, grease). The coloured oil is rubbed onto a reference surface, and the workpiece is then rubbed against the coloured reference; the transfer (by contact) of the pigment indicates the position of high spots on the workpiece.1 This method has been used to test the flatness of surfaces and the trueness of a bearing assembly.
When Prussian blue is mixed with methylated spirits it forms a quick drying stain which is known as marking blue or layout dye. This stain is used in the marking out operation in metalworking. Both the "marking out" blue, and the "scraping blue" may be referred to as engineer's blue, which can lead to substantial confusion.
The engineer may be told to "Blue it up" when using this piece of equipment.
Prussian blue is widely used by tool makers when the core and cavity of a mould is matched during final assembly. It is also used in other tooling applications - especially during assembly - such as stamping tools and pressure die casting tools. A thin coating of Prussian blue is applied (usually with a paint brush) on the 'insert' - regardless of the shape or contour - of the mould or tool before the matching is done with the mating part. If the Prussian blue (generally called as just "blue") appears evenly on the mating area, it is considered - by the tool makers - as "good matching" and thus expecting a good final product from the tool. Usually no tool would be transferred to testing or production without "blue matching", a term generally used by the tool makers in Asia. In other words, Prussian blue is considered as an integral part of precision tool making.
Note: in the US, the terms machinist's blue, scraping blue, or simply bluing are used instead of engineer's blue.
References
- ^ W A J Chapman; Workshop Technology, Part 1; Arnold
|
||||||||
Wikipedia content modification information:
- This page was last modified on 1 December 2008, at 15:49.
Wikipedia Authorship and Review
Wikipedia content provided here is not reviewed directly by MedLibrary.org. Wikipedia content is authored by an open community of volunteers and is not produced by or in any way affiliated with MedLibrary.org.
Wikipedia Usage Guidelines
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "Engineer's blue".
The URL for this specific entry is:
All Wikipedia text is available under the terms of the GNU Free Documentation License. (See Copyrights for details). Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.