Welcome to the MedLibrary.org Wikipedia Supplement on Fused silica -- Please Click to Return to Front Page

A sphere manufactured by NASA out of fused quartz for use in a gyroscope in the Gravity Probe B experiment. It is one of the most accurate spheres ever created by humans, differing in shape from a perfect sphere by no more than 40 atoms of thickness. It is thought that only neutron stars are smoother.

Fused quartz and fused silica are types of glass containing primarily silica in amorphous (non-crystalline) form. They are manufactured using several different processes. Note that glasses formed by the traditional 'melt-quench' methods (heating the material to melting temperatures, then rapidly cooling to the solid glass phase), are often referred to as 'vitreous', as in 'vitreous silica'. The term 'vitreous' is synomynous with 'glass', when used in the melt-quench context.

Fused quartz is manufactured by melting naturally occurring quartz crystals of high purity at approximately 2000°C, using either an electrically heated furnace (electrically fused) or a gas/oxygen-fuelled furnace (flame fused). Fused quartz is normally transparent.

Fused quartz can also form naturally. The naturally occurring form is usually referred to as Metaquartzite and is formed under metamorphic conditions. An increase in heat causes the crystals within the quartz to become fused together.

Fused silica is produced using high purity silica sand as the feedstock, and is normally melted using an electric furnace, resulting in a material that is translucent or opaque. (This opacity is caused by very small air bubbles trapped within the material.)

Synthetic fused silica is made from a silicon-rich chemical precursor usually using a continuous flame hydrolysis process which involves chemical gasification of silicon, oxidation of this gas to silicon dioxide, and thermal fusion of the resulting dust (although there are alternative processes). This results in a transparent glass with an ultra-high purity and improved optical transmission in the deep ultraviolet. One common method involves adding silicon tetrachloride to a hydrogen-oxygen flame, however use of this precursor results in environmentally unfriendly by-products including chlorine and hydrochloric acid. To eliminate these by-products, new processes have been developed using an alternative feedstock, which has also resulted in a higher purity fused silica with further improved deep ultraviolet transmission.

Fumed silica is manufactured by a similar flame hydrolysis process to synthetic fused silica, however it is in the form of a fine powder/dust and is typically used in applications such as fillers for rubbers and plastics, coatings, adhesives, cements, sealants, cosmetics, pharmaceuticals, inks and abrasives.

The optical and thermal properties are superior to those of other types of glass due to its purity (or rather, its lack of impurities). For these reasons, it finds use in situations such as semiconductor fabrication and laboratory equipment. It has better ultraviolet transmission than most other glasses, and so is used to make lenses and other optics for the ultraviolet spectrum. Its low coefficient of thermal expansion also makes it a useful material for precision mirror substrates.

Chemistry

Fused quartz is a noncrystalline form of silicon dioxide (SiO₂), which is also called silica. (The crystalline form of this material is quartz).

Applications

Specially prepared fused silica is also the key starting material used to make optical fiber for telecommunications.

Because of its strength and high melting point (compared to ordinary glass), fused silica is used as the envelope of halogen lamps, which must operate at a high envelope temperature to achieve their combination of high brightness and long life.

The combination of strength, thermal stability, and UV transparency makes it an excellent substrate for projection masks for photolithography.

Due to the thermal stability and composition it is used in the semiconductor fabrication furnaces.

Fused quartz has nearly ideal properties for fabricating first surface mirrors such as those used in telescopes. The material behaves in a predictable way and allows the optical fabricator to put a very smooth polish onto the surface and produce the desired figure with fewer testing iterations. In some instances, fused quartz has been used to make the individual elements of special purpose lens, such as the Zeiss 105mm f/4.3 UV Sonnar lens for the Hasselblad camera. This lens is used for UV photography, as the quartz has a lower extinction rate than lens made with more common flint or crown formulas.

Fused silica as an industrial raw material is used to make various refractory shapes such as crucibles, trays, shrouds, and rollers for many high temperature thermal processes including steel making, foundries, and glass manufacture. Refractory shapes made from fused silica have excellent thermal shock resistance and are chemically inert to most elements and compounds including virtually all acids, regardless of concentration. Translucent fused silica tubes are commonly used to sheathe electric elements in room heaters, industrial furnaces and other similar applications.

Physical properties

The extremely low coefficient of thermal expansion, about 0.55 ppm/°C (20-320°C), accounts for its remarkable ability to undergo large, rapid temperature changes without cracking (see thermal shock).

"UV grade" synthetic fused silica (sold under various tradenames including "HPFS", "Spectrosil" and "Suprasil") has a very low metallic impurity content making it transparent deeper into the ultraviolet. An optic with a thickness of 1 cm will have a transmittance of about 50% at a wavelength of 170 nm, which drops to only a few percent at 160 nm. However, its infrared transmission is limited by strong water absorptions at 2.2 μm and 2.7 μm.

"IR grade" fused quartz (tradenames "Infrasil", "Vitreosil IR" and others) which is electrically fused, has a greater presence of metallic impurities, limiting its UV transmittance wavelength to around 250 nm, but a much lower water content, leading to excellent infrared transmission up to 3.6 μm wavelength. All grades of transparent fused quartz/fused silica have near-identical physical properties.

The water content (and therefore infrared transmission of fused quartz and fused silica) is determined by the manufacturing process. Flame fused material always has a higher water content due to the combination of the hydrocarbons and oxygen fuelling the furnace forming hydroxyl [OH] within the material. An IR grade material typically has an [OH] content of <10 parts per million.

Optical properties

Dispersion of fused silica can be approximated by the following Sellmeier equation (Malitson 1965):

where

and wavelength is measured in micrometers.

This equation is valid between 0.21 micrometres and 3.71 micrometres (see ref)

Typical properties of clear fused silica

• Density: 2.203 g/cm³
• Hardness: 5.3–6.5 (Mohs Scale)
• Tensile strength: 48.3 MPa
• Compressive strength: >1.1 GPa
• Bulk modulus: ~37 GPa
• Rigidity modulus: 31 GPa
• Young's modulus: 71.7 GPa
• Poisson's ratio: 0.16
• Lame elastic constants: λ=15.872 GPa, μ=31.261 GPa
• Coefficient of thermal expansion: 5.5×10^-7/°C (average from 20 °C to 320 °C)
• Thermal conductivity: 1.3 W/(m·K)
• Specific heat capacity: 45.3 J/(mol·K)
• Softening point: c. 1665 °C
• Annealing point: c. 1140 °C
• Strain point: 1070 °C
• Electrical resistivity: >10¹⁸ Ω×m
• Dielectric constant: 3.75 at 20 °C 1 MHz
• Dielectric loss factor: less than 0.0004 at 20 °C 1 MHz
• Index of refraction: at 587.6 nm (n_d): 1.4585
• Strain-optic coefficients: p₁₁=0.113, p₁₂=0.252.
• Hamaker Constant: A=6.5 zJ.

See also

• Quartz
• Silica (fused silica hardness = 8-10 GPa)
• Vycor
• Aqua aura
• Glass

• List of minerals

External links

• Momentive World leader in the manufacturing of clear and translucent tubing; rods and solid shapes; and fused crucibles for growing single crystal silicon.
• Saint-Gobain Quartz Manufacturer of fused quartz and fused silica materials and products with downloadable data sheets in the Library
• Fused silica contains a list of commercially available fused silica glasses
• Translume Micromachining contractor in USA that works exclusively with fused silica glass.

References

• Malitson, I.H. "Interspecimen Comparison of the Refractive Index of Fused Silica," Journal of the Optical Society of America 55, no. 10 (October 1965): 1205-1209

Wikipedia content modification information:

• This page was last modified on 10 November 2008, at 21:25.

Wikipedia Authorship and Review

Wikipedia content provided here is not reviewed directly by MedLibrary.org. Wikipedia content is authored by an open community of volunteers and is not produced by or in any way affiliated with MedLibrary.org.

Wikipedia Usage Guidelines

This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "Fused silica".

The URL for this specific entry is:

• http://medlibrary.org/medwiki/Fused_silica

All Wikipedia text is available under the terms of the GNU Free Documentation License. (See Copyrights for details). Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.