Welcome to the MedLibrary.org Wikipedia Supplement on International Organization for Standardization -- Please Click to Return to Front Page

International Organization for Standardization
Organisation internationale de normalisation

list of members
Formation	23 February 1947
Type	NGO
Purpose/focus	International standard
Headquarters	Geneva, Switzerland
Membership	157 members
Official languages	English and French
Website	www.iso.org

The International Organization for Standardization (Organisation internationale de normalisation), widely known as ISO (pronounced /ˈɑɪsəʊ/), is an international-standard-setting body composed of representatives from various national standards organizations. Founded on 23 February 1947, the organization promulgates world-wide proprietary industrial and commercial standards. It is headquartered in Geneva, Switzerland.^[1]

While ISO defines itself as a non-governmental organization, its ability to set standards that often become law, either through treaties or national standards, makes it more powerful than most non-governmental organizations. In practice, ISO acts as a consortium with strong links to governments.

Contents 1 Name and abbreviation 2 International Standards and other publications 3 Members 4 Products named after ISO 5 ISO/IEC Joint Technical Committee 1 6 IWA document 7 Criticism 8 See also 9 References 10 External links

Name and abbreviation

The organization's logos in its two official languages, English and French, include the word ISO (pronounced /ˈʌɪsəʊ/), and it is usually referred to by this short-form name. ISO is not an acronym or initialism for the organization's full name in either official language. Rather, the organization adopted ISO based on the Greek word ἴσος (isos), meaning equal. Recognizing that the organization’s initials would be different in different languages, the organization's founders chose ISO as the universal short form of its name. This, in itself, reflects the aim of the organization: to equalize and standardize across cultures.^[2][3]

International Standards and other publications

ISO's main products are the International Standards. ISO also publishes Technical Reports, Technical Specifications, Publicly Available Specifications, Technical Corrigenda, and Guides.^[4]

International Standards are identified in the format ISO[/IEC][/ASTM] [IS] nnnnn[:yyyy] Title, where nnnnn is the number of the standard, yyyy is the year published, and Title describes the subject. IEC for International Electrotechnical Commission is included if the standard results from the work of ISO/IEC JTC1 (the ISO/IEC Joint Technical Committee). ASTM is used for standards developed in cooperation with ASTM International. The date and IS are not used for an incomplete or unpublished standard, and may under some circumstances be left off the title of a published work.

Technical Reports are issued when "a technical committee or subcommittee has collected data of a different kind from that which is normally published as an International Standard".^[4][5]

Members

ISO has 157 national members,^[6] out of the 195 total countries in the world.

ISO has three membership categories:

• Member bodies are national bodies that are considered to be the most representative standards body in each country. These are the only members of ISO that have voting rights.
• Correspondent members are countries that do not have their own standards organization. These members are informed about ISO's work, but do not participate in standards promulgation.
• Subscriber members are countries with small economies. They pay reduced membership fees, but can follow the development of standards.

Participating members are called "P" members as opposed to observing members which are called "O" members.

Products named after ISO

The fact that many of the ISO-created standards are ubiquitous has led, on occasion, to common use of "ISO" to describe the actual product that conforms to a standard. Some examples of this are:

• CD images end in the file extension "ISO" to signify that they are using the ISO 9660 standard filesystem as opposed to another file system - hence CD images are commonly referred to as "ISOs". Virtually all computers with CD-ROM drives can read CDs that use this standard. Some DVD-ROMs also use ISO 9660 filesystems.
• Photographic film's sensitivity to light, its "film speed," is described by ISO 5800:1987. Hence, the film's speed is often referred to as its "ISO number."

ISO/IEC Joint Technical Committee 1

Main article: ISO/IEC JTC1

To deal with the consequences of substantial overlap in areas of standardization and work related to information technology, ISO and IEC formed a Joint Technical Committee known as the ISO/IEC JTC1. It was the first such joint committee, and to date remains the only one.

IWA document

Like ISO/TS, International Workshop Agreement (IWA) is another armoury of ISO for providing rapid response to requirements for standardization in areas where the technical structures and expertise are not currently in place. The utility harmonizes technical urgency industrial wide.

Criticism

With the exception of a small number of isolated standards,^[7] ISO standards are normally not available free of charge, but for a purchase fee,^[8] which has been seen by some as too expensive for small Open source projects.^[9]

With respect to hospital work, ISO is often mistakenly considered to be an international healthcare accreditation scheme. It is not.

ISO and IEC has garnered criticism for the handling of the standardization of Office Open XML (ISO/IEC 29500) and the ISO/IEC rubberstamping of OASIS approved standards like OpenDocument (ISO/IEC 26300). Martin Bryan, Convenor of ISO/IEC JTC1/SC34 and WG1, is quoted by saying:

I would recommend my successor that it is perhaps time to pass WG1’s outstanding standards over to OASIS, where they can get approval in less than a year and then do a PAS submission to ISO, which will get a lot more attention and be approved much faster than standards currently can be within WG1.

The disparity of rules for PAS, Fast-Track and ISO committee generated standards is fast making ISO a laughing stock in IT circles. The days of open standards development are fast disappearing. Instead we are getting 'standardization by corporation'.^[10]

Computer security entrepreneur and Ubuntu investor, Mark Shuttleworth, commented on the Standardization of Office Open XML process by saying

I think it de-values the confidence people have in the standards setting process,

and that ISO did not carry out its responsibility. He also noted that Microsoft had intensely lobbied many countries that traditionally had not participated in ISO and stacked technical committees with Microsoft employees, solution providers and resellers sympathetic to Office Open XML.

When you have a process built on trust and when that trust is abused, ISO should halt the process ... ISO is an engineering old boys club and these things are boring so you have to have a lot of passion … then suddenly you have an investment of a lot of money and lobbying and you get artificial results ... The process is not set up to deal with intensive corporate lobbying and so you end up with something being a standard that’s not clear.^[11]

See also

• American National Standards Institute (ANSI)
• Deutsches Institut für Normung, German Institute for Standardization (DIN)
• British Standards
• Countries in International Organization for Standardization
• Canadian Standards Association
• European Committee for Standardization (CEN)
• Commonwealth of Independent States (CIS) set of standards (GOST)
• International Classification for Standards
• International Electrotechnical Commission (IEC) and ISO/IEC standards.
• International Telecommunication Union (ITU)
• ISO A4
• ISO country code
• List of ISO standards
• Standardization
• Standards organization
• Terminology planning policy
• Bureau of Indian Standards (BIS)
• International healthcare accreditation

References

External links

• ISO's official website (free access to the catalogue of standards only, not to the contents)
• Publicly Available Standards (free access to a small subset of the standards)
• The ISO Standards Glossary
• ISO/IEC JTC1
• ISO Advanced search for standards and/or projects (search engine by/on ISO)

Wikipedia content modification information:

• This page was last modified on 7 September 2008, at 10:09.

Wikipedia Authorship and Review

Wikipedia content provided here is not reviewed directly by MedLibrary.org. Wikipedia content is authored by an open community of volunteers and is not produced by or in any way affiliated with MedLibrary.org.

Wikipedia Usage Guidelines

This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "International Organization for Standardization".

The URL for this specific entry is:

• http://medlibrary.org/medwiki/International_Organization_for_Standardization

All Wikipedia text is available under the terms of the GNU Free Documentation License. (See Copyrights for details). Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.