This MedLibrary.org supplementary page on Nomex is provided directly from the open source Wikipedia as a service to our readers. Please see the note below on authorship of this content, as well as the Wikipedia usage guidelines. To search for other content from our encyclopedia supplement, please use the form below:
Related Sponsors
 |
This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed. (August 2008) |
Nomex (styled NOMEX) is a registered trademark for flame resistant meta-aramid material developed in the early 1960s by DuPont and first marketed in 1967.1
It can be considered an aromatic nylon, the meta variant of the para-aramid Kevlar. It is sold in both fiber and sheet forms and is used as a fabric wherever resistance from heat and flame is required. Nomex sheet is actually a calendered paper and made in a similar fashion. Nomex Type 410 paper is the original and one of the larger grade types made, mostly for electrical insulation purposes. The Spruance plant, in Richmond, VA, is the sole North American paper production site. The paper is used in electrical laminates such as circuit boards and transformer cores as well as fireproof honeycomb structures where it is saturated with a phenolic resin. Honeycomb structures such as these, as well as mylar-Nomex laminates are used extensively in aircraft construction. Both the firefighting and vehicle racing industries use Nomex to create clothing and equipment that can withstand intense heat. All aramids are heat and flame resistant but Kevlar, having a para orientation, can be molecularly aligned and gives high strength. Meta aramid cannot align during filament formation and has poor strength. Nomex fiber is made in the USA and in Spain (Asturias).
A Nomex hood is a common piece of firefighting equipment. It is placed on the head on top of a firefighter's face mask. The hood protects the portions of the head not covered by the helmet and face mask from the intense heat of the fire.
Race car drivers wear driving suits constructed of Nomex and or other fire retardant materials, along with Nomex gloves, long underwear, balaclavas, socks, and shoes to protect them in the event of a fire. The FIA and the SFI Foundation provide specifications for flame-resistant drivers clothing to be used in racing. The standards range from single layer suits that provide some protection against flash fires to much thicker multi layer SFI-15 suits required by the National Hot Rod Association that can protect a driver for up to 30 seconds against the intense heat generated by the nitromethane fuel they use.
Military pilots and aircrew wear flight suits made of over 92 percent Nomex to protect them from the possibility of cockpit fires and other mishaps. Recently, troops riding in ground vehicles have also begun wearing Nomex. The remaining material is typically Kevlar thread used to hold the fabric together at the seams.
In the U.S. space program, Nomex has been used for the Thermal Micrometeoroid Garment on the Extravehicular Mobility Unit (in conjunction with Kevlar and Gore-Tex) and ACES pressure suit, both for fire and extreme environment (water immersion to near vacuum) protection, and as thermal blankets on the payload bay doors, fuselage, and upper wing surfaces of the Space Shuttle Orbiter. It has also been used for the airbags for the Mars Pathfinder and MER rovers, the Galileo atmospheric probe, the Cassini-Huygens Titan probe, and will be incorporated into the new Crew Exploration Vehicle that will replace the Shuttle after 2010.
Nomex has also been used for its unique acoustic qualities, the first time being used in Troy, NY at Rensselaer Polytechnic Institute's Experimental Media and Performing Arts Center EMPAC's main concert hall. Nomex reflects high-frequency sound, and increases mid- and low-level frequency sound. According to RPI President Shirley Ann Jackson, EMPAC is the first venue in the world to use Nomex for acoustic reasons.
The DuPont scientist responsible for discoveries leading to the creation of Nomex, Dr. Wilfred Sweeny, earned a DuPont Lavoisier Medal2 partly for this work in 2002.
Honeycomb-structured Nomex paper is also used as a spacer between layers of lead in the ATLAS Liquid Argon Calorimeter3
See also
- Aramid
- Kevlar
- Twaron
- Teijinconex
- Silica Aerogel
- PET film
- Thermal Micrometeoroid Garment
- Gore-Tex
- Phoebe
References
- ^ "Nomex® 40th Anniversary". DuPont. Retrieved on 2008-08-08.
- ^ "Nomex® Scientist Earns Lavoisier Medal", FiberSource (June 20, 2002). Retrieved on 8 August 2008.
- ^ http://ieeexplore.ieee.org/iel5/19/31498/01468561.pdf
External links
- DuPont Nomex
- Dupont.com - 40th anniversary of Nomex - 2007
- Comparison of single-layer Nomex suits
|
|||||||||||
|
||||||||||||||||||
Wikipedia content modification information:
- This page was last modified on 16 November 2008, at 08:13.
Wikipedia Authorship and Review
Wikipedia content provided here is not reviewed directly by MedLibrary.org. Wikipedia content is authored by an open community of volunteers and is not produced by or in any way affiliated with MedLibrary.org.
Wikipedia Usage Guidelines
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "Nomex".
The URL for this specific entry is:
All Wikipedia text is available under the terms of the GNU Free Documentation License. (See Copyrights for details). Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.