Welcome to the MedLibrary.org Wikipedia Supplement on PET film (biaxially oriented) -- Please Click to Return to Front Page

Biaxially-oriented polyethylene terephthalate (boPET) polyester film is used for its high tensile strength, chemical and dimensional stability, transparency, reflective, gas and aroma barrier properties and electrical insulation.

A variety of companies manufacture boPET and other polyester films under different trade names. In the US and Britain, the most well-known trade names are Mylar and Melinex.

Contents 1 History and manufacture 2 Uses for boPET film 3 References 4 External links

History and manufacture

BoPET film was developed in the mid-1950s, originally by DuPont and Imperial Chemical Industries (ICI). In 1960 and 1964, NASA launched the Echo satellites, 100 feet (30 m) diameter balloons of metallized 0.005 inches (0.13 mm) thick boPET film.

The manufacturing process begins with a film of molten Polyethylene terephthalate (PET) being extruded onto a chill roll, which quenches it into the amorphous state. It is then biaxially oriented by drawing. The most common way of doing this is the sequential process, in which the film is first drawn in the machine direction using heated rollers and subsequently drawn in the transverse direction, i.e. orthogonally to the direction of travel, in a heated oven. It is also possible to draw the film in both directions simultaneously, although the equipment required for this is somewhat more elaborate. Draw ratios are typically around 3 to 4 in each direction.

Once the drawing is completed, the film is "heat set" or crystallized under tension in the oven at temperatures typically above 200 °C. The heat setting step prevents the film from shrinking back to its original unstretched shape and locks in the molecular orientation in the film plane. The orientation of the polymer chains is responsible for the high strength and stiffness of biaxially oriented PET film, which has a typical Young's modulus of about 4 GPa. Another important consequence of the molecular orientation is that it induces the formation of many crystal nuclei. The crystallites that grow rapidly reach the boundary of the neighboring crystallite and remain smaller than the wavelength of visible light. As a result, biaxially oriented PET film has excellent clarity, despite its semicrystalline structure.

If it were produced without any additives, the surface of the film would be so smooth that layers would adhere strongly to one another when the film wound up, similar to the sticking of clean glass plates when stacked. To make handling possible, microscopic inert inorganic particles are usually embedded in the PET to roughen the surface of the film.

Biaxially oriented PET film can be aluminized by evaporating a thin film of metal onto it. The result is much less permeable to gasses (important in food packaging) and reflects up to 99% of light, including much of the infrared spectrum. For some applications like food packaging, the aluminized boPET film can be laminated with a layer of polyethylene, which provides sealability and improves puncture resistance. The polyethylene side of such a laminate appears dull and the PET side shiny.

Metallized nylon (or "foil") balloons used for floral arrangements and parties are often mistakenly called "Mylar", one of the trade names for boPET film.

Other coatings, such as conductive indium tin oxide (ITO), can be applied to boPET film by sputter deposition.

Uses for boPET film

Uses for boPET polyester films include, but are not limited to:

Flexible Packaging and food contact applications

• Laminates containing metallized boPET film protect food against oxidation and aroma loss, achieving long shelf life. Examples are coffee "foil" packaging and pouches for convenience foods.
• Attractive glossy or matte surfaces on the outside of packages are achieved using boPET film.
• White boPET film is used as lidding for dairy goods such as yoghurt.
• Clear boPET film is used as lidding for fresh or frozen ready meals. Due to its excellent heat resistance, it can remain on the package during microwave or oven heating.
• Roasting bags

Covering over paper

• A clear overlay on a map, on which notations, additional data, or copied data, can be drawn without damaging the map
• Metallized boPET is used as a mirror-like decorative surface on some book covers, T-shirts, and other flexible cloths.
• Protective covering over buttons/pins/badges
• The glossy top layer of a Polaroid SX-70 photographic print
• As a backing for very fine sandpaper
• boPET film is used in bagging comic books, in order to best protect them during storage from environmental conditions (moisture, heat, and cold) that would otherwise cause paper to slowly deteriorate over time. This material is used for archival quality storage of documents by the Library of Congress. It should be noted that while boPET is widely (and effectively) used in this archival sense, it is not immune to the devastating effects of fire and heat and could potentially melt, depending on the intensity of the heat source, causing further damage to the encased item.¹

• For protecting the spine of important documents, such as medical records.

Insulating material

• An electrical insulating material
• Insulation for houses and tents in cold environments, covering the inner walls with the metallized surface facing inward, thus reflecting heat back into the space
• Insulation for houses and tents in hot environments, covering the outer walls with the metallized surface facing outward, thus reflecting heat away from the space
• Five layers of metallized boPET film in NASA's spacesuits make them radiation resistant and keep astronauts warm.
• Metallized boPET film "emergency blankets" conserve a shock victim's body heat.
• As a thin strip to form an airtight seal between the control surfaces and adjacent structure of aircraft, especially gliders.
• Light insulation for indoor gardening.
• Wildland fire shelters.
• Proximity(aluminized) suits used by AR-FF fire fighters for protection from the high amount of heat relase from fuel fires.
• Aluminized boPET films are no longer used as thermal/acoustic insulation in aircraft since they were found to have been a factor in the Swissair Flight 111 crash. The accident investigation showed that the aluminum layer prevents the film from self-extinguishing in a fire under the conditions in aircraft.

Solar and marine applications

• Solar sails as an alternative means of propulsion for spacecraft such as Cosmos 1
• Metallized boPET solar curtains reflect sunlight and heat away from windows.
• Aluminized, as an inexpensive solar eclipse viewer, although care must be taken, because invisible fissures can form in the metal film, reducing its effectiveness.
• High performance sails for sailboats and hanggliders

Electronic / acoustic applications

• Carrier for flexible printed circuits
• Very thin boPET film is often used as the diaphragm material in electrostatic loudspeakers and electret microphones.
• boPET film has been used in the production of banjo & drumheads since 1958 due to its durability and acoustical properties when stretched over the bearing edge of the drum. They are made in single- and double-ply versions, with each ply being between 2 mils and 10 mils (0.05 – 0.25 mm) in thickness, with a clear or opaque surface, originally used by the company EVANS.
• boPET film is used as the substrate in practically all magnetic recording tapes and floppy disks.
• Metallized boPET film, along with other plastic films, is used as a dielectric in foil capacitors.
• Clear boPET bags are used as packaging for audio media such as compact discs and vinyl records.

Graphic arts

• Often engineering plans or architectural drawings are plotted onto sheets of boPET film. The boPET sheets become legal documents from which copies or blueprints are made. boPET sheets are more durable and can withstand more handling than bond paper.
• Overhead transparency film for photocopiers or laser printers (boPET film withstands the high heat).

Other

• For materials in kites
• Covering glass to decrease probability of shattering
• In theatre effects as confetti.
• As the adhesive strip to attach the string to a teabag
• One of the many materials used as Windsavers or valves for valved harmonicas
• As a light diaphragm material separating gases in hypersonic shock and expansion tube facilities
• On California farmland, highly reflective aluminized PET film ribbons are tied to the plants to create shimmers from the sun for an effect similar to a scarecrow.
• As a beamsplitter in Fourier transform infrared spectroscopy

References

External links

• Plastics: Background Information for Teachers. by The American Plastics Council (HTML format) or (PDF format) - 1.9MB), which includes the "chasing arrow" recycling symbols (PET is #1) and a description of plastics.
• Links to most manufacturers of boPET films are available at the AMPEF website

Wikipedia content modification information:

• This page was last modified on 22 November 2008, at 17:10.

Wikipedia Authorship and Review

Wikipedia content provided here is not reviewed directly by MedLibrary.org. Wikipedia content is authored by an open community of volunteers and is not produced by or in any way affiliated with MedLibrary.org.

Wikipedia Usage Guidelines

This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "PET film (biaxially oriented)".

The URL for this specific entry is:

• http://medlibrary.org/medwiki/PET_film_(biaxially_oriented)

All Wikipedia text is available under the terms of the GNU Free Documentation License. (See Copyrights for details). Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.