This MedLibrary.org supplementary page on Supercritical water oxidation is provided directly from the open source Wikipedia as a service to our readers. Please see the note below on authorship of this content, as well as the Wikipedia usage guidelines. To search for other content from our encyclopedia supplement, please use the form below:
Related Sponsors
 |
This article or section is missing citations or needs footnotes. Using inline citations helps guard against copyright violations and factual inaccuracies. (May 2008) |
 |
This article or section includes a list of references or external links, but its sources remain unclear because it lacks inline citations. You can improve this article by introducing more precise citations where appropriate. (May 2008) |
 |
This article has no lead section. To comply with Wikipedia's lead section guidelines, one should be written. Please discuss this issue on the talk page and read the lead section guide to make sure the introduction summarizes the article. |
Supercritical water oxidation or SCWO is a process that occurs in water at temperatures and pressures above a mixture's thermodynamic critical point. Under these conditions water becomes a fluid with unique properties that can be used to advantage in the destruction of hazardous wastes such as PCBs. The fluid has a density between that of water vapor and liquid at standard conditions, and exhibits high gas-like diffusion rates along with high liquid-like collision rates. In addition, solubility behavior is reversed so that chlorinated hydrocarbons become soluble in the water, allowing single-phase reaction of aqueous waste with a dissolved oxidizer. The reversed solubility also causes salts to precipitate out of solution, meaning they can be treated using conventional methods for solid-waste residuals. Efficient oxidation reactions occur at low temperature (400-650 °C) with reduced NOx production.
SCWO can be classified as green chemistry or as a Clean Technology. The elevated pressures and temperatures required for SCWO are routinely encountered in industrial applications such as petroleum refining and chemical synthesis.
A unique addition to the world of supercritical water (SCW) oxidation is generating high-pressure flames inside the SCW medium. The pioneer works on high-pressure Supercritical Water Flames were carried out by professor EU Franck at the German University of Karlsruhe in the late 80s. The works were mainly aimed at anticipating conditions which would cause spontaneous generation of non-desirable flames in the flameless SCW oxidation process. These flames would cause instabilities to the system and its components. ETH Zurich pursued the investigation of hydrothermal flames in continuously operated reactors. The rising needs for waste treatment and destruction methods motivated a Japanese Group in the Ebara Corporation to explore SCW flames as an environmental tool.
Commercial applications
Several companies in the United States are working to commercialize supercritical reactors to destroy hazardous wastes. Widespread commercial application of SCWO technology requires a reactor design capable of resisting fouling and corrosion under supercritical conditions.
In Japan a number of commercial SCWO applications exist, among them one unit for treatment of halogenated waste built by Organo. In Korea two commercial size units have been built by Hanwha.
In Europe, Chematur Engineering AB of Sweden commercialized the SCWO technology for treatment of spent chemical catalysts to recover the precious metal, the AquaCat process. The unit has been built for Johnson Matthey in the UK. It is the only commercial SCWO unit in Europe and with its capacity of 3 m³/h it is the largest SCWO unit in the world. Chematur's Super Critical Fluids technology was acquired by SCFI Group (Cork, Ireland) who are actively commercializing the Aqua Critox SCWO process for treatment of sludge, e.g. deinking sludge and sewage sludge. Many long duration trials on these applications have been made and thanks to the high destruction efficiency of 99.9%+ the solid residue after the SCWO process is well suited for recycling. In the case of deinking sludge as paper filler and in the case of sewage sludge as phosphorus and coagulant. SCFI Group operate a six metric ton/day Aqua Critox demonstration plant in Cork, Ireland.
Turbosystems Engineering (California, USA) is actively commercializing their patented transpiring wall SCWO reactor ("TWR") with a focus on renewable energy applications. The TWR has been demonstrated to provide superior resistance to fouling and corrosion. The TWR is capable of operating at reaction temperatures in excess of 800 deg C, at pressures above or below the critical pressure of water, and has been demonstrated at a feedrate of 0.5 metric tons/day. Turbosystems Engineering SCWO Technology
See also
External links
There are some research groups working in this topic throughout the world:
- High Pressure Processes Group (Spain)
- Clean Technology Group (UK)
- FZK Karlsruhe (Germany)
- ETH Zurich, Transport Processes and Reactions Laboratory (Switzerland)
- UCL (London, UK) Clean Materials technology group working on Continuous Hydrothermal Flow Synthesis
- UBC (Vancouver, BC) Mechanical Engineering Research Activities, including projects on SCWO
- Turbosystems Engineering SCWO technology
|
||||||||||||||
Wikipedia content modification information:
- This page was last modified on 21 October 2008, at 16:50.
Wikipedia Authorship and Review
Wikipedia content provided here is not reviewed directly by MedLibrary.org. Wikipedia content is authored by an open community of volunteers and is not produced by or in any way affiliated with MedLibrary.org.
Wikipedia Usage Guidelines
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "Supercritical water oxidation".
The URL for this specific entry is:
All Wikipedia text is available under the terms of the GNU Free Documentation License. (See Copyrights for details). Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.