Welcome to the MedLibrary.org Wikipedia Supplement on Thermal mass -- Please Click to Return to Front Page

Thermal mass (C_th, also called heat capacity) is the capacity of a body to store heat, and is calculated as the product of mass the body m and the specific heat capacity for the material c_p, and typically is measured in units of J/°C or J/K (which are equivalent).

Thermal mass as a concept is most frequently applied in the field of building design. In this context, thermal mass provides 'inertia' against temperature fluctuations. For example, for a building, when outside temperatures are fluctuating throughout the day, a large thermal mass within the insulated portion of the house can serve to 'flatten out' the daily temperature fluctuations, since the thermal mass will absorb heat when the surroundings are hotter than the mass, and give heat back when the surroundings are cooler.

Thermal mass is effective in improving building comfort in any place that experiences these types of daily temperature fluctuations -- both in winter as well as in summer. When used well and combined with passive solar design, thermal mass can play an important role in major reductions to energy use in active heating and cooling systems and hence the reduction of greenhouse gas emissions due to fossil fuel burning in power stations.

Contents 1 Properties required for good thermal mass 2 Use of thermal mass in different climates 2.1 Temperate / Cold Temperate climates 2.2 Hot, arid climates (e.g. desert) 2.3 Hot humid climates (e.g. sub-tropical/tropical) 3 Materials commonly used for thermal mass 4 Seasonal energy storage 5 References 6 See also

Properties required for good thermal mass

Ideal materials for thermal mass are those materials that have:

• high specific heat capacity,
• high density

Any solid, liquid, or gas that has mass will have some thermal mass. A common misconception is that only concrete or earth soil has thermal mass; even air has thermal mass (although very little.)

A useful table of volumetric heat capacity for building materials is available from yourhome.gov.au (but note that their definition of thermal mass is slightly different).

Use of thermal mass in different climates

The correct use and application of thermal mass is dependent on the prevailing climate in a district.

Temperate / Cold Temperate climates

Thermal mass is ideally placed within the building and situated where it still can be exposed to winter sunlight (via windows) but insulated from heat loss.

The thermal mass is warmed passively by the sun or additionally by internal heating systems during the day. Heat stored in the mass is then released back into the interior during the night. It is essential that it be used in conjunction with the standard principles of passive solar design.

Any form of thermal mass can be used. A concrete slab foundation either left exposed or covered with conductive materials e.g. tiles; is one easy solution. Another novel method is to place the masonry facade of a timber-framed house on the inside ('reverse-brick veneer'). Thermal mass in this situation is best applied over a large area rather than in large volumes or thicknesses. 7.5-10 cm (3-4") is often adequate.

Since the most important source of heat is from the sun, the ratio of glazing to thermal mass is an important factor to consider. Various formulas have been devised to determine this.¹ As a general rule, additional solar-exposed thermal mass needs to applied in a ratio from 6-8:1 for any area of north facing (Southern Hemisphere)(south facing, Northern Hemisphere) glazing above 7% of the total floor area. e.g. a 200 sqm house with 20sqm of north facing glazing has 10% of glazing by total floor area. 6sqm of that glazing will require additional thermal mass. Therefore, 36-48 sqm of solar-exposed thermal mass is required. The exact requirements vary from climate to climate.

Hot, arid climates (e.g. desert)

This is a classical use of thermal mass. Examples include adobe or rammed earth houses. Its function is highly dependent on marked diurnal temperature variations. The wall predominantly acts to retard heat flow from the exterior to the interior during the day. The high volumetric heat capacity and thickness prevents heat from reaching the inner surface. When temperatures fall at night, the walls re-radiate the heat back into the night sky. In this application it is important for such walls to be massive to prevent the ingress of heat into the interior.

Hot humid climates (e.g. sub-tropical/tropical)

The use of thermal mass is the most challenging in this environment where night temperatures remain elevated. Its use is primarily as a temporary heat sink. However, it needs to be strategically located to prevent overheating. It should be placed in an area that is not directly exposed to solar gain and also allow adequate ventilation at night to carry away stored energy without increasing internal temperatures any further. If to be used at all it should be used in judicious amounts and again not in large thicknesses.

Materials commonly used for thermal mass

• Adobe brick or mudbrick.

• Earth, mud, and sod. Dirt's thermal conductivity depends on its density, moisture content, particle shape, temperature, and composition. Early settlers to Nebraska built houses with thick walls made of dirt and sod because wood, stone, and other building materials were scarce. The extreme thickness of the walls provided some insulation, but mainly served as thermal mass, absorbing heat during the day and releasing it during the night. Nowadays, people sometimes use earth sheltering around their homes for the same effect. In earth sheltering, the thermal mass comes not only from the walls of the building, but from the surrounding earth that is in physical contact with the building. This provides a fairly constant, moderating temperature that reduces heat flow through the adjacent wall.

• Rammed earth. Rammed earth provides excellent thermal mass because of its high density, and the high specific heat capacity of the soil used in its construction.

• Natural rocks and stones.

• Concrete, clay bricks and other forms of masonry. The thermal conductivity of concrete depends on its composition and curing technique. Concretes with stones are more thermally conductive than concretes with ash, perlite, fibers, and other insulating aggregates.

• Water, for example large tanks of water in an area with direct sunlight.

Seasonal energy storage

If enough mass is used it can create a seasonal advantage. That is it can heat in the winter and cool in the summer. This is sometimes called "Passive annual heat storage or PAHS". The PAHS system has been successfully used at 7000 ft. in Colorado and in a number of homes in Montana.^{citation needed}

References

1. ^ Chiras, D. The Solar House: Passive Heating and Cooling. Chelsea Green Publishing Company; 2002.

See also

• Thermal mass, a technical guide from the Australian Government.
• Trombe wall
• Thermal energy storage
• Specific heat capacity
• Thermal Mass - Energy Savings Potential in Residential Buildings
• Thermal conductivity and specific heat charts

Wikipedia content modification information:

• This page was last modified on 21 November 2008, at 01:28.

Wikipedia Authorship and Review

Wikipedia content provided here is not reviewed directly by MedLibrary.org. Wikipedia content is authored by an open community of volunteers and is not produced by or in any way affiliated with MedLibrary.org.

Wikipedia Usage Guidelines

This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "Thermal mass".

The URL for this specific entry is:

• http://medlibrary.org/medwiki/Thermal_mass

All Wikipedia text is available under the terms of the GNU Free Documentation License. (See Copyrights for details). Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.