Transition element

This MedLibrary.org supplementary page on Transition element is provided directly from the open source Wikipedia as a service to our readers. Please see the note below on authorship of this content, as well as the Wikipedia usage guidelines. To search for other content from our encyclopedia supplement, please use the form below:

Related Sponsors

BM Pharmacy Generic pharmaceuticals at unbeatable prices. Insomnia, men's health, hair health, pain control. bmpharmacy.com
Online Pharmacy Carisoprodol, tadalafil, sildenafil, vardenafil and more... xlpharmacy.com
MedBasket.com Discreet. Inexpensive. Fast shipping. Great selection. What more can we say? medbasket.com
Frugalmed 2000 reasons to shop with us first. frugalmed.com
Ads by Tiva

 It has been suggested that d-block be merged into this article or section. ()

In chemistry, the term transition metal (sometimes also called a transition element) has two possible meanings:

  • More strictly, IUPAC defines1 a transition metal as "an element whose atom has an incomplete d sub-shell, or which can give rise to cations with an incomplete d sub-shell." By this definition, zinc, cadmium, and mercury are excluded from the transition metals, as they have a d10 configuration. Only a few transient species of these elements that leave ions with a partly filled d subshell have been formed, and mercury(I) only occurs as Hg22+, which does not strictly form a lone ion with a partly filled subshell, and hence these three elements are inconsistent with the latter definition.2 They do form ions with a 2+ oxidation state, but these retain the 4d10 configuration. Element 112 may also be excluded although its oxidation properties are unlikely to be observed due to its radioactive nature. This definition corresponds to groups 3 to 11 on the periodic table.

The first definition is simple and has traditionally been used. However, many interesting properties of the transition elements as a group are the result of their partly filled d subshells.Periodic trends in the d block (transition metals) are less prevailing than in the rest of the periodic table. Going across a period, the valence doesn't change, so the electron being added to an atom goes to the inner shell, not outer shell, strengthening the shield. 3

The (loosely defined) transition metals are the 40 chemical elements 21 to 30, 39 to 48, 71 to 80, and 103 to 112. The name transition comes from their position in the periodic table of elements. In each of the four periods in which they occur, these elements represent the successive addition of electrons to the d atomic orbitals of the atoms. In this way, the transition metals represent the transition between group 2 elements and group 13 elements.

Group 3 (III B) 4 (IV B) 5 (V B) 6 (VI B) 7 (VII B) 8 (VIII B) 9 (VIII B) 10 (VIII B) 11 (I B) 12 (II B)
Period 4 Sc 21 Ti 22 V 23 Cr 24 Mn 25 Fe 26 Co 27 Ni 28 Cu 29 Zn 30
Period 5 Y 39 Zr 40 Nb 41 Mo 42 Tc 43 Ru 44 Rh 45 Pd 46 Ag 47 Cd 48
Period 6 La 57 Hf 72 Ta 73 W 74 Re 75 Os 76 Ir 77 Pt 78 Au 79 Hg 80
Period 7 Ac 89 Rf 104 Db 105 Sg 106 Bh 107 Hs 108 Mt 109 Ds 110 Rg 111 Uub 112

Contents

Variable oxidation states

As opposed to group 1 and group 2 metals, ions of the transition elements may have multiple oxidation states, since they can lose f electrons without a high energetic penalty. Manganese, for example has two 4s electrons and five 3d electrons, which can be removed. Loss of all of these electrons leads to a +7 oxidation state. Osmium and ruthenium compounds are commonly found alone in stable +8 oxidation states, which is among the highest for isolatable compounds.

This table shows some of the oxidation states found in compounds of the transition-metal elements.
A solid circle represents a common oxidation state, and a ring represents a less common (less energetically favourable) oxidation state.

Patterns in oxidation state emerge across the period of transition elements:

  • The number of oxidation states of each ion increases up to Mn, after which they decrease. Later transition metals have a stronger attraction between protons and electrons (since there are more of each present), which then would require more energy to remove the electrons.
  • When the elements are in lower oxidation states, they can be found as simple ions. However, transition metals in higher oxidation states are usually bonded covalently to electronegative elements like oxygen or fluorine, forming polyatomic ions such as chromate, vanadate, or of course the ion permanganate.

Colored compounds

From left to right, aqueous solutions of: Co(NO3)2 (red); K2Cr2O7 (orange); K2CrO4 (yellow); NiCl2 (green); CuSO4 (blue); KMnO4 (purple).

We observe varying frequencies of electromagnetic radiation in the visible region of the electromagnetic spectrum as colour. Different colours result from the changed energy distribution of photons (light particles) after it has been reflected, transmitted or absorbed after hitting a substance. Because of their structure, transition metals form many different coloured ions and complexes. Colour even varies between the different ions of a single element - MnO4− (Mn in oxidation state 7+) is a purple compound, whereas Mn2+ is pale-pink.

Coordination by ligands can play a part in determining color in a transition compound, due to changes in energy of the d orbitals. Ligands remove degeneracy of the orbitals and split them in to higher and lower energy groups. The energy gap between the lower and higher energy orbitals will determine the color of light that is absorbed, as electromagnetic radiation is only absorbed if it has energy corresponding to that gap. When a ligated ion absorbs light, some of the electrons are promoted to a higher energy orbital. Since different frequency light is absorbed, different colors are observed.

The colour of a complex depends on:

  • the nature of the metal ion, specifically the number of electrons in the d orbitals
  • the arrangement of the ligands around the metal ion (for example geometric isomers can display different colours)
  • the nature of the ligands surrounding the metal ion. The stronger the ligands then the greater the energy difference between the split high and low 3d groups.

The complex ion formed by the d block element zinc (though not strictly a transition element) is colorless, because the 3d orbitals are full - no electrons are able to move up to the higher group.

See also

References

  1. ^ International Union of Pure and Applied Chemistry. "transition element". Compendium of Chemical Terminology Internet edition.
  2. ^ Cotton, F. Albert; Wilkinson, G.; Murillo, C. A. (1999). Advanced Inorganic Chemistry (6th ed.). New York: Wiley.
  3. ^ JCE 2005 (82) 1660 [Nov] Trends in Ionization Energy of Transition-Metal Elements
v • d • e
Periodic tables
Layouts
Lists of elements by
Groups
1 (Alkalis) · 2 (Alkaline earths) · 3 · 4 · 5 · 6 · 7 · 8 · 9 · 10 · 11 · 12 · 13 · 14 · 15 (Pnictogens) · 16 (Chalcogens) · 17 (Halogens) · 18 (Noble gases)
Periods:
1 · 2 · 3 · 4 · 5 · 6 · 7 · 8
Other element categories
Blocks

Wikipedia content modification information:

  • This page was last modified on 2 December 2008, at 16:41.

Wikipedia Authorship and Review

Wikipedia content provided here is not reviewed directly by MedLibrary.org. Wikipedia content is authored by an open community of volunteers and is not produced by or in any way affiliated with MedLibrary.org.

Wikipedia Usage Guidelines

This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "Transition element".

The URL for this specific entry is:

All Wikipedia text is available under the terms of the GNU Free Documentation License. (See Copyrights for details). Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.