This MedLibrary.org supplementary page on Tunable laser is provided directly from the open source Wikipedia as a service to our readers. Please see the note below on authorship of this content, as well as the Wikipedia usage guidelines. To search for other content from our encyclopedia supplement, please use the form below:
Related Sponsors
A tunable laser is a laser whose wavelength of operation can be altered in a controlled manner. While all laser gain media allow small shifts in output wavelength, only a few types of lasers allow continuous tuning over a significant wavelength range.
There are many types and categories of tunable lasers. They exist in the gas, liquid, and solid state. Among the types of tunable lasers are excimer lasers, CO2 lasers, dye lasers (liquid and solid state), transition metal solid-state lasers, semiconductor diode lasers, and free electron lasers1. Tunable lasers find applications in spectroscopy, photochemistry and optical communications.
Contents |
Types of tunability
Single line tuning
Since no real laser is truly monochromatic, all lasers can emit light over some range of frequencies, known as the linewidth of the laser transition. In most lasers, this linewidth is quite narrow (for example, the 1064 nm wavelength transition of a Nd:YAG laser has a linewidth of approximately 120 GHz, corresponding to a 0.45 nm wavelength range2). Tuning of the laser output across this range can be achieved by placing wavelength-selective optical elements (such as an etalon) into the laser's optical cavity, to provide selection of a particular longitudinal mode of the cavity.
Multi-line tuning
Most laser gain media have a number of transition wavelengths on which laser operation can be achieved. For example, as well as the principal 1064 nm output line, Nd:YAG has weaker transitions at wavelengths of 1052 nm, 1074 nm, 1112 nm, 1319 nm, and a number of other lines3. Usually, these lines do not operate unless the gain of the strongest transition is suppressed, e.g., by use of wavelength-selective dielectric mirrors. If a dispersive element, such as a prism, is introduced into the optical cavity, tilting of the cavity's mirrors can cause tuning of the laser as it "hops" between different laser lines. Such schemes are common in argon-ion lasers, allowing tuning of the laser to a number of lines from the ultraviolet and blue through to green wavelengths.
Narrowband tuning
For some types of lasers the laser's cavity length can be modified, and thus they can be continuously tuned over a significant wavelength range. Distributed feedback (DFB) semiconductor lasers and vertical cavity surface emitting lasers (VCSELs) use periodic distributed Bragg reflector (DBR) structures to form the mirrors of the optical cavity. If the temperature of the laser is changed, thermal expansion of the DBR structure causes a shift in its peak reflective wavelength and thus the wavelength of the laser. The tuning range of such lasers is typically a few nanometres, up to a maximum of approximately 4 nm, as the laser temperature is changed over ~50 K. As a rule of thumb the wavelength is tuned by 0.08 nm/°C for DFB lasers operating in the 1550 nm wavelength regime. Such lasers are commonly used in optical communications applications such as DWDM-systems to allow adjustment of the signal wavelength.
Widely tunable lasers
Sample Grating Distributed Bragg Reflector lasers (SG-DBR) have a much larger tunable range, by the use of vernier tunable Bragg mirrors and a phase section, a single mode output range of >50 nm can be selected. Other technologies to achieve wide tuning ranges for DWDM-systems 4 are:
- External Cavity Lasers using a MEMS structure for tuning the cavity length.
- DFB Laser Arrays based on several thermal tuned DFB lasers: Coarse tuning is achieved by selecting the correct laser bar. Fine tuning is then done thermally
- Tunable VCSEL: One of the two mirror stacks is movable. To achieve sufficient output power out of a VCSEL structure, lasers in the 1550 nm domain are usually either optically pumped or have an additional optical amplifier built into the device.
As of 2008 there is no widely tunable VCSEL commercially available anymore for DWDM-system application.
History
The first true broadly tunable laser was the dye laser 5 6. Dye lasers and some vibronic solid-state lasers have extremely large linewidths, allowing tuning over a range of tens to hundreds of nanometres7. Titanium-doped sapphire is the most common tunable solid-state laser, capable of laser operation from 670 nm to 1100 nm wavelength. Typically these laser systems incorporate a Lyot filter into the laser cavity, which is rotated to tune the laser. Other tuning techniques involve diffraction gratings, prisms, etalons, and combinations of these8.
See also
References
- Koechner, Walter (1988). Solid-State Laser Engineering (2nd Edition ed.), Springer-Verlag. ISBN 3-540-18747-2.
- ^ F. J. Duarte (ed.), Tunable Lasers Handbook (Academic, 1995)
- ^ Koechner, §2.3.1, p49.
- ^ Koechner, §2.3.1, p53.
- ^ Tunable Lasers at Lightreading
- ^ F. P. Schafer (ed.), Dye Lasers (Springer, 1990)
- ^ F. J. Duarte and L. W. Hillman (eds.), Dye Laser Principles (Academic, 1990)
- ^ Koechner, §2.5, pp66–78.
- ^ F. J. Duarte and L. W. Hillman (eds.), Dye Laser Principles (Academic, 1990) Chapter 4
Wikipedia content modification information:
- This page was last modified on 9 September 2008, at 13:36.
Wikipedia Authorship and Review
Wikipedia content provided here is not reviewed directly by MedLibrary.org. Wikipedia content is authored by an open community of volunteers and is not produced by or in any way affiliated with MedLibrary.org.
Wikipedia Usage Guidelines
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "Tunable laser".
The URL for this specific entry is:
All Wikipedia text is available under the terms of the GNU Free Documentation License. (See Copyrights for details). Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.