This MedLibrary.org supplementary page on Umbilical cable is provided directly from the open source Wikipedia as a service to our readers. Please see the note below on authorship of this content, as well as the Wikipedia usage guidelines. To search for other content from our encyclopedia supplement, please use the form below:
Related Sponsors
An umbilical cable or umbilical is a cable which supplies required consumables to an apparatus. It is named for its similar function to an umbilical cord. An umbilical can supply power to a remote electrical device or a more elaborate design can supply air and power to a spacesuit. Early spacesuits used umbilicals but modern designs carry their own temperature/humidity control, air supply and electric batteries.
Subsea umbilicals are deployed on the seabeds (ocean floors) to supply necessary control and chemicals to subsea oil and gas wells, subsea manifolds and any subsea system requiring a remote control, such as Remotely operated vehicle.
A Diver umbilical cable is a cable which supplies breathing gas and other services from a surface supply to a diver.
For shallow water surface supply air diving, the diver umbilical is typically a 3-part umbilical comprising a gas hose, "pneumo" hose, and diver comms/lifeline cable. The "pneumo" hose is open at the diver's end all the way to a pressure gauge on the surface dive control panel, where the supervisor can see the diver's depth in the water at all times.
A 4-part diver umbilical will also have a hot water supply hose.
A 5-part diver umbilical will also include a Mini Video cable to allow the surface controller to see the video picture transmitted to the surface from the divers hat camera.
For saturation diving from a bell, a typical diver excusion umbilical may be an 8-part umbilical with a gas supply hose, gas reclaim hose, hot water hose, pneumo hose, tracking hose, comms/lifeline cable, Mini Video cable and Hat Light cable.
When there is risk of the umbilical cable being damaged by scratching on rock or coral, the umbilical bundle may be over-braided with a polypropylene braid cover.
Early diver umbilicals were simply the individual components bundled together and taped every metre or so with duct tape. These bundles tend to distort and produce kinks in the components caused by bending (particularly dangerous if the kink is in the divers gas supply hose), and require frequent maintenance. More recent umbilicals comprise all the components cabled together so that there is no chance of a kink, no separate lifeline component is required, and no tape is required to hold the umbilical together. An additional component such as a video cable for a divers camera, or a hat light cable, can be added by manually cabling this into the existing cabled umbilical.
Wikipedia content modification information:
- This page was last modified on 20 October 2008, at 11:21.
Wikipedia Authorship and Review
Wikipedia content provided here is not reviewed directly by MedLibrary.org. Wikipedia content is authored by an open community of volunteers and is not produced by or in any way affiliated with MedLibrary.org.
Wikipedia Usage Guidelines
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "Umbilical cable".
The URL for this specific entry is:
All Wikipedia text is available under the terms of the GNU Free Documentation License. (See Copyrights for details). Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.