This MedLibrary.org supplementary page on Vacuum bag is provided directly from the open source Wikipedia as a service to our readers. Please see the note below on authorship of this content, as well as the Wikipedia usage guidelines. To search for other content from our encyclopedia supplement, please use the form below:
Related Sponsors
A vacuum bag is a bag made of strong rubber-coated fabric or polymer film, open at one end, and used to bond or laminate materials. In some applications the bag encloses the entire material, or in other applications a mold is used to form one face of the laminate with the bag being single sided to seal the outer face of the laminate to the mold. The open end is sealed, and air is drawn out with a vacuum pump. As a result, uniform pressure approaching one atmosphere is applied to the surfaces of the object inside the bag, holding parts together while the adhesive cures. The entire bag may be placed in a temperature-controlled oven, oil bath or water bath and gently heated to accelerate curing.
Laminating of flat objects can be performed more efficiently in a heated laminating press, but when the objects are curved or have irregular shapes, a vacuum bag is normally used. This is true in large or commercial woodworking facilities, but recreational woodworkers rarely have access to a heated veneer press.
Typically, polyurethane or vinyl materials are used to make the bag, which is commonly open at both ends. This gives access to the piece, or pieces to be glued. A plastic rod is laid onto the bag, which is then folded over the rod. A plastic sleeve with an opening in it, is then snapped over the rod. This procedure forms a seal at both ends of the bag, when the vacuum is ready to be drawn.
These bags can be homemade, or purchased. They are available in many sizes.
A "platen" is used inside the bag for the piece being glued to lay on. The platen has a series of small slots cut into it, to allow the air under it to be evacuated. The platen must have rounded edges and corners to prevent the vacuum from tearing the bag.
All bags have access to the vacuum via a nipple which penetrates the bag.
When a curved part is to be glued in a vacuum bag, it is important that the pieces being glued be placed over a solidly built form, or have an Air Bladder placed under the form. This air bladder has access to to "free air" outside the bag. It is used to create an equal pressure under the form, preventing it from being crushed. 1
See also
 |
This tool article is a stub. You can help Wikipedia by expanding it. |
References
- Lee Jesberger (2007). Pro Woodworking Tips.com.
External links
 |
Wikimedia Commons has media related to: Vacuum bag |
- Pro Woodworking Tips.com Vacuum Systems Index Information on Vacuum Bags - Pro Woodworking Tips.com
Wikipedia content modification information:
- This page was last modified on 30 November 2008, at 06:18.
Wikipedia Authorship and Review
Wikipedia content provided here is not reviewed directly by MedLibrary.org. Wikipedia content is authored by an open community of volunteers and is not produced by or in any way affiliated with MedLibrary.org.
Wikipedia Usage Guidelines
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "Vacuum bag".
The URL for this specific entry is:
All Wikipedia text is available under the terms of the GNU Free Documentation License. (See Copyrights for details). Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.