This MedLibrary.org supplementary page on Volt-ampere is provided directly from the open source Wikipedia as a service to our readers. Please see the note below on authorship of this content, as well as the Wikipedia usage guidelines. To search for other content from our encyclopedia supplement, please use the form below:
Related Sponsors
A volt-ampere in electrical terms, is the amount of power in an alternating current (AC) circuit equal to a current flow of one ampere at an electromotive force of one volt. It is equivalent to watts for non-reactive circuits and in the strictest sense is identical, but by convention the two are used as units for subtly different physical quantities.
The instantaneous real power delivered to any load is the voltage across the load at a given instant times the current through the load at that same instant. Making such a measurement requires an instrument that can make simultameous instantaneous measurements of current and voltage. If separate current and voltage instruments that are incapable of coordinating their measurements are used, and which give root mean square measurements, and the two measurements are multiplied, the result will be apparent power; for reactive loads (loads containing capacitance or inductance), apparent power is greater than real power. By convention, the unit of measure for apparent power is the volt-ampere. For resistive loads (i.e. non-reactive loads) real power equals apparent power; incandescent lights are an example of nearly resistive loads. (Ciletti et al. 1993, 82)
While the volt-ampere (abbreviated VA) and the watt are dimensionally equivalent one may find products rated in both VAs and watts with different numbers. This is common practice on UPSs (Uninterruptible Power Supplies). The VA rating is the apparent power that a UPS is capable of producing, while the watt rating is the real power (or true power) it is capable of producing, as opposed to reactive power. In the type of loads often used with UPSs, such as computers, the apparent power used (volt-amperes) will be larger than the true power used (watts). The ratio of these two quantities is called the power factor.
See also
References
- Calculating VA & Watts: http://www.powervar.com/Eng/ABCs/CalcVAWATTS.asp
- Ciletti, M. D., Irwin, J. D., Kraus, A. D., Balabanian, N., Bickard, T. A., and Chan, S. P. 1993. Linear circuit analysis. In Electrical Engineering Handbook, edited by R. C. Dorf. Boca Raton: CRC Press.
- How to Convert Watts to VA and KVA to KW Simplified: http://www.powerstream.com/VA-Watts.htm
Wikipedia content modification information:
- This page was last modified on 30 November 2008, at 02:48.
Wikipedia Authorship and Review
Wikipedia content provided here is not reviewed directly by MedLibrary.org. Wikipedia content is authored by an open community of volunteers and is not produced by or in any way affiliated with MedLibrary.org.
Wikipedia Usage Guidelines
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "Volt-ampere".
The URL for this specific entry is:
All Wikipedia text is available under the terms of the GNU Free Documentation License. (See Copyrights for details). Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.